Skip to content
Google Ads & LSA

PPC for Contractors Without Paying for Junk Clicks

What clicks and leads cost by trade, the break-even math, the six Google Ads settings we fix on almost every contractor account, and what $1,500 to $15,000 a month buys.

By Dory AineUpdated Nov 17, 202626 min read
Summarize this article withChatGPTClaudePerplexityGoogle AIGrok
PPC for contractors: plumbing contractor in his van taking a call from a Google ad

PPC for contractors can fill a slow week fast. It can also spend your money on job seekers, DIYers and people three counties away. In LocaliQ’s trade-by-trade numbers (April 2024 to March 2025), a typical plumbing click cost $10.49. At that price, 300 wasted clicks would cost you $3,147.

PPC works for contractors when the job is urgent or high-ticket, someone answers the phone, and the account is set up tight. Tight means five Google defaults and two other switches changed, and call tracking working before the first dollar. Judge it on cost per booked job, not clicks. If Local Services Ads cover your trade, test them alongside search ads. HVAC owners can see a season-by-season setup in our guide to Google Ads for HVAC.

Key takeaways
  • Search ads charge per click; Local Services Ads charge when a customer gets in touch. How PPC works
  • A typical roofing click cost about what a plumbing click did, but only 3.70% of roofing clicks became leads, and the typical roofing lead cost $228.15. Costs by trade
  • Your break-even cost per lead is gross profit per job times your close rate. Break-even math
  • Broad match, search partners, Presence or interest, all-day ads and AI Max are Google’s starting settings for a new Search campaign, and we change all five. The seven settings
  • In the accounts we audit, most of the waste shows up in the search terms report, so we check it every week. Weekly routine

Jump to the FAQ

How contractor PPC works, and when it pays

PPC for contractors means paying Google each time someone clicks your ad. Most of the time that’s Google search ads, the text ads at the top of the results for searches like “water heater replacement near me.” It pays when people search for the job, the job is worth enough, and somebody picks up the phone.

PPC (pay per click) is how you’re billed. CPC (cost per click) is the price of one click, and it comes from an auction that runs every time someone searches, so it moves with your town, your trade and the season.

Google sells contractors three main kinds of paid spots. They bill in different ways, so keep them straight:

Ad typeHow you payWhere it showsBest for
Search adsPer clickTop and bottom of Google resultsJobs you pick, words you control
Local Services AdsWhen a customer gets in touch from your adA separate box near the top of resultsReady-to-book calls in covered trades
Performance MaxOne budget that Google’s AI spreads across its channelsSearch, Display, YouTube, Discover, Gmail and MapsAccounts with lots of clean conversion data

This guide is about search ads. That’s where you have the most control, and it’s where most contractor budgets leak. If you want the pay-per-lead side, read our Local Services Ads guide.

Search ads pay off best for:

  • Urgent jobs. A burst pipe, a dead AC in July, a roof leak in a storm. People search, call the first good option and book fast.
  • Big tickets. A repipe, a full roof or a kitchen remodel can carry a high cost per lead and still make money.
  • Holes in the calendar. Ads can be live this week. SEO takes months.

Hold off if nobody answers during ad hours, if you don’t have a page for the job, or if the budget would get split across ten services and learn nothing. Fix those first; it’s cheaper than the clicks you’d waste.

What clicks and leads cost by trade

The best trade-by-trade numbers we’ve found come from LocaliQ, an ad company that studied 3,211 of its own customers’ home services search campaigns on Google and Microsoft Ads. The data runs from April 2024 to March 2025. LocaliQ calls the figures averages, but they’re medians, so read them as “a typical account,” not a quote.

Trade (LocaliQ category)Typical cost per clickTypical conversion rateTypical cost per lead
Plumbing$10.497.63%$129.02
Roofing & Gutters$10.703.70%$228.15
Air Conditioning Installation & Repair$9.686.56%$127.74
Heating & Furnaces$9.307.48%$129.02
Electricians & Electrical Contractors$12.189.08%$93.69
Construction & Contractors (General)$5.312.61%$165.67
All home services$7.857.33%$90.92

Conversion rate is the share of clicks that turned into a tracked lead, like a call or a form. And yes, plumbing and heating landed on the same cent.

Cost per lead by trade, and what drives it
Bar = typical cost per lead. Below each bar: typical cost per click and the share of clicks that became a lead.
Roofing & gutters$228.15
$10.70 a click · 3.70% convert
General contractors$165.67
$5.31 a click · 2.61% convert
Plumbing$129.02
$10.49 a click · 7.63% convert
AC install & repair$127.74
$9.68 a click · 6.56% convert
Electricians$93.69
$12.18 a click · 9.08% convert
The two trades that convert the fewest clicks into leads, roofing and general contractors, pay the most per lead.
Source: LocaliQ, 2025 Search Ad Benchmarks for Home Services. 3,211 US LocaliQ customer campaigns on Google and Microsoft Ads, April 2024 to March 2025. Figures are medians (LocaliQ labels them averages).

Is there anything newer? LocaliQ’s 2026 benchmarks across all industries (updated June 1, 2026) lump every trade into one Home & Home Improvement row: $8.33 a click, 8.05% conversion and $90.92 a lead. Oddly, that $90.92 is identical to the 2025 home services figure. The two reports use different categories, so it doesn’t prove a trend either way. The 2026 report doesn’t split trades, so the table above is still the newest trade-by-trade view we know of.

Roofing’s problem is conversion, not click price. A roofing click costs about what a plumbing click does. But fewer than 4 in 100 roofing clicks became a lead. That’s why we push roofers to fix the landing page and the phone before they raise bids.

General contractors get the cheapest clicks on the list and still pay $165.67 a lead. Our read: remodel and build buyers shop longer, so fewer of them call on the first visit.

HVAC shops should read two rows, AC and heating. They cost about the same per lead, so the real budget question is when each season peaks where you work.

Electricians pay the most per click of the trades in our table and still get the lowest cost per lead of these trades. Our guess is the jobs: a dead outlet or a breaker that keeps tripping is small and specific, so people call the first decent result.

Two cautions before you budget off this. First, these are one company’s customers, so your market can run well above or below them. A big metro in peak season is a different auction than a small town in March.

Second, don’t plan on prices dropping. In the 2025 report, cost per lead went up for 69% of home services businesses, and LocaliQ puts the average year-over-year increase at 10.51%. LocaliQ’s 2026 report says cost per lead fell overall, all industries combined, for the first time in five years, but nothing in it shows home services leads getting cheaper, so we wouldn’t budget for that.

Your break-even cost per lead

A “good” cost per lead is whatever your jobs can pay for. You can work out your own ceiling in two minutes with two numbers you already know: what you keep from an average job, and how many real leads you turn into booked jobs.

Break-even cost per lead = gross profit per job × close rate.

Gross profit is the job price minus labor, materials and other direct costs. Close rate here is the share of ad leads that become a booked job. Leave spam calls and wrong numbers out of the lead count, or your close rate looks worse than it is.

Spend right up to break-even and the job pays for its labor, materials and the ads that found it. Nothing is left for overhead or profit, which is why we aim well under it.

Example: a plumber and a water heater

Example (made-up numbers, swap in yours): say a water heater swap leaves you $1,000 in gross profit, and you book 4 in 10 of the real leads that call about one. Your break-even is $1,000 × 0.40 = $400 a lead.

The typical plumbing lead in the table cost $129.02. Even if your market runs 50% higher, about $194, you’re still under half your ceiling. That’s the cushion we want, even in a pricey market.

One adjustment. LocaliQ counts every tracked call and form as a lead, junk included, while your break-even only counts real ones. If a quarter of your calls turn out to be junk, that $194 lead really costs you about $258 per real lead. Still well under $400.

Example: a remodeler and a kitchen

Same math, bigger ticket (again, an example calculation). Say a kitchen leaves $10,000 in gross profit and you book 10% of ad leads. Break-even is $10,000 × 0.10 = $1,000 a lead, so the $165.67 general contractor figure looks tiny.

The catch is volume. At $5.31 a click and 2.61% conversion, $2,000 a month buys about 377 clicks and about 10 leads. At 10%, that’s one signed kitchen a month. One slow month proves nothing, so give it at least a quarter.

The number that matters: cost per booked job

Cost per booked job = cost per lead ÷ close rate.

A $130 lead that books 4 in 10 costs $325 per booked job. A $90 lead that books 1 in 10 costs $900. The “cheap” lead costs almost three times as much where it counts. We see owners chase a lower cost per lead and end up with worse jobs, so every campaign we run gets judged on cost per booked job.

Two rules we use:

  • Aim for a cost per lead at half your break-even or less. Some months run hot, and you want room.
  • Work it out per service, not for the whole shop. Drain cleaning and a full repipe have very different ceilings, so they shouldn’t share a budget.

Google’s settings are built to show your ad to as many people as possible. A plumber who covers 12 zip codes wants the opposite: only people in those 12, searching for work he does. Five of the seven settings below are Google’s defaults. The other two are switches that can widen your reach without you noticing.

First, check which mode you’re in. Google Ads accounts run in Smart Mode or Expert Mode, and Smart campaigns can only be created in Smart Mode. After setup, Google says it “manages your campaign automatically.” We often meet owners running a Smart campaign who never knew they’d picked one.

We build contractor accounts in Expert Mode with regular Search campaigns, and everything below assumes that setup. If you’re in Smart Mode, switch the account to Expert Mode. In our experience the Smart campaign keeps running after the switch, so pause it once the new Search campaign is live.

SettingWhat goes wrongWhat we setWhere it lives
Keyword match type (default: broad)Ads show on loosely related searchesPhrase and exact for money keywordsKeywords, match type column
Search partners (default: included)Ads run on partner sites you can’t seeOff at launchCampaign settings, Networks
Display Network checkboxSearch budget leaks onto other websitesUncheckedCampaign settings, Networks
Location options (default: Presence or interest)People outside your area see your adsPresenceCampaign settings, Locations, Location options
Ad schedule (default: all day)You pay for clicks when nobody answersHours someone picks upCampaign settings, Ad schedule
AI Max (default: on in new Search campaigns)Ads match searches beyond your keywords and land on pages you didn’t pickOff at launchCampaign settings, AI Max
Auto-apply recommendationsGoogle re-adds broad match, partners and DisplayOff for anything that adds keywords or reachRecommendations, Auto-apply

1. Broad match

Google’s help page says broad match is the default match type for every keyword. It also says broad match can show your ad on searches “that don’t contain the direct meaning of your keywords.” When we audit a contractor account running broad match, the search terms report is where we find the job seekers and DIY questions.

We put money keywords in “quotes” (phrase match) or [brackets] (exact match). Google’s page also says it’s “critical to use Smart Bidding with broad match.” Smart Bidding learns from your tracked leads, and a new account doesn’t have many yet. So we start with phrase and exact, then test broad once there are a few months of clean lead data.

2. Search partners

New Search campaigns include search partners by default. Those are other sites that show Google’s search ads, and Google doesn’t tell you which ones ran yours unless it’s Performance Max. We turn partners off at launch. Later we might test them in one campaign, using Segment, then Network (with search partners) to split out the results. If partner leads cost more, they go back off.

3. The Display Network checkbox

Search campaign setup has a Display Network checkbox, so check it before you launch. Tick it, and when there’s a chance to show your ads on other websites, Google says “Google will take it.” Someone reading a recipe blog isn’t looking for a plumber. Leave it unchecked. If you want display ads, give them their own campaign and their own budget.

4. Location options

The default location option, Presence or interest, also reaches people who’ve only shown interest in your area. Someone in Phoenix looking up your town before a visit can see your ad. You can’t fix their drain from 2,000 miles away.

Google’s own lead generation advice for Performance Max says that if leads come from outside your areas, switch to “Presence: People in or regularly in your included locations.” We start every contractor there. Google notes most campaigns get fewer impressions after the switch. For a business that can only serve local homes, those are impressions you never wanted.

5. Ad schedule

Campaigns show ads “All day” by default. If night calls go to voicemail, you’ve paid for a click that may end with a call to the next company on the page. Set the schedule to the hours someone answers.

There’s a middle ground. Keep the ads running but schedule the call asset to your answered hours, so night searchers don’t get a tap-to-call button. They can still fill out the form on your page, and you call them back first thing. Shops that answer 24/7 can leave everything on.

6. Auto-apply recommendations

If auto-apply is on, Google can make changes for you. The list includes “Add broad match keywords,” “Expand your reach with Google search partners” and “Use Display expansion.” Those quietly undo fixes 1 to 3. Another option, “Remove conflicting negative keywords,” can delete negatives you added on purpose. Go to Recommendations, then Auto-apply, and switch off anything that adds keywords or reach. Apply the good ones by hand.

7. AI Max

Google’s setup page says “New Search campaigns have the AI Max feature turned on by default.” Google calls it an optimization layer inside Search campaigns, not a new campaign type. Two of its parts, text customization and final URL expansion, are also on by default once AI Max is on.

What it does: it can match your ads to searches beyond your keywords, write new ad text from your site, and send the click to a different page than the one you picked. That last part works against the one-page-per-service setup below. Google also says these features need conversion-based Smart Bidding to work well. So when we build a new campaign, we switch AI Max off in the campaign settings and revisit it once call and form tracking has a few clean months behind it.

Track calls before you spend a dollar

If you can’t see which clicks turned into calls, you can’t tell a good keyword from a bad one. For most contractors, the phone is where the work comes in. So phone tracking goes in first, gets tested, and only then do the ads go live.

Roofer in a driveway taking a new customer call next to his work truck loaded with shingles
Call reporting uses a Google forwarding number to tie a call like this one back to the ad.

Here’s the order we set it up on a new account:

  1. Calls straight from the ad. Add a call asset and turn on call reporting, which uses Google forwarding numbers. You set a minimum call length, and every call that lasts at least that long counts as a conversion.
  2. Calls from your website. Lots of people click the ad, read the page, then call. Google’s website call tracking swaps in a forwarding number on your page for visitors who came from an ad, so those calls get credit too. It needs the Google tag and a small phone snippet on your site. Your web person can add both.
  3. Form fills. Send forms to a thank-you page and count the page load. Google lets you match it with a “URL contains” rule, like “thank-you.”
  4. Test it. Fill out your own form and make sure it records. Then watch the first week of call conversions. If the phone rings from ads and nothing shows up, something’s broken.

For the minimum call length, we start near a minute and then listen to a week of calls. If real “do you come out to my town” calls wrap up at 40 seconds, we lower it.

One trap: don’t count taps on your phone number as leads. A tap isn’t a call. When we audit an account that “converts” at a suspiciously great rate, phone-number clicks counted as conversions are one of the first things we look for.

If you use a call tracking tool that records calls, play a few each week. You’ll hear job seekers, vendors and people asking for work you don’t do. Each one tells you a word to add to your negatives.

A contractor PPC campaign structure that fits how you sell

Put a $189 drain clearing and a $14,000 repipe in one campaign and they fight over one budget. The cheap, busy searches eat the money before the big jobs get a turn. Give each kind of job its own campaign, its own ads and its own page.

Here’s how we’d lay out Google Ads for plumbers on a small account. Swap in your own services and prices. There’s more on the trade side in our plumbing marketing overview.

Campaign (own budget)Ad groupsSample keywordsLanding page
EmergencyBurst pipe, leak repair, no hot water“emergency plumber”, [burst pipe repair]Emergency service page, phone up top
Water heatersRepair, replacement, tankless“water heater replacement”, [tankless water heater install]Water heater page with the brands you install
Drains and sewerDrain cleaning, sewer line, camera inspection“drain cleaning”, “sewer line repair”Drain page that says what a visit includes
BrandYour company name[your company name]Homepage

Why pay for your own name? In the accounts we run, brand clicks cost far less than service clicks, and if a competitor bids on your name, your ad keeps their ad from being the only one on the page. We keep that campaign small.

Ads that name the job and the town

Write the ad for the ad group, not for the company. Google’s responsive search ads take up to 15 headlines and 4 descriptions, with headlines capped at 30 characters and descriptions at 90. Google mixes and matches them, so every headline has to make sense on its own.

For a tankless water heater ad group, with Milford standing in for your town, we’d start with headlines like these:

Headline (30 characters max)What it does
Tankless Water Heater InstallRepeats the search
Licensed Plumbers in MilfordNames the town and the license (use only what’s true)
Same-Week Tankless InstallsGives a reason to call now (only if true)
Upfront Price Before We StartAnswers the money worry

Descriptions get 90 characters, room for one promise and one proof. Two we’d test for the same ad group:

  • Tankless installs with permit and haul-away included. Call for an upfront price today.
  • Out of hot water? We install most tankless units in one day. Licensed and insured.

Only use lines that are true for your shop. Then add the extras that help a contractor most. A call asset puts a tap-to-call button on phones. A location asset pulls your address from your Google Business Profile, so link the two accounts. Sitelinks can point to your financing page, reviews page or a second service. Skip anything you can’t back up on the landing page.

One page per service

Sending every click to the homepage is the other leak we see all the time. Google grades three things in Quality Score: expected clickthrough rate, ad relevance and landing page experience. It rates each one against other advertisers who showed for the same search over the last 90 days. A page about the exact job helps the landing page part. Tight ad groups with matching ads help the other two.

A good ad landing page has the job in the headline, your number near the top, photos of your own work, the towns you serve and a short form. It loads fast on a phone. If you don’t have pages like that yet, build them first. They help your SEO for contractors work too.

Roofers and HVAC shops

When we build Google Ads for roofers as part of our roofing marketing, we split repair, replacement and gutters. After a hail or wind storm, the repair campaign gets more budget. We keep the radius tight, but not tiny, because Google warns that with a very small target your ads “might only show intermittently or not at all.” Insurance claim keywords go in only if the roofer really works claims.

For HVAC (more in our HVAC marketing page), we split AC repair, furnace repair and new system installs. Then we move budget between them as the seasons turn.

Negative keywords by trade

A plumber bidding on drain cleaning will pay for “drain cleaning jobs” until someone adds “jobs” as a negative keyword. Negatives tell Google which searches to skip. Adding one takes seconds.

Three rules from Google’s negative keyword page trip people up:

  1. Negatives don’t stretch. Your regular keywords catch close variants. Negatives don’t. If you want “career” and “careers” both blocked, add both. Google does handle capital letters and misspellings for you.
  2. The default is negative broad match. A two-word negative like roofing jobs only blocks searches that contain both words. It won’t stop “roofer jobs near me,” because that search doesn’t contain “roofing.” For words that should never trigger an ad, add them as single words.
  3. You can build one account-level list. It applies across your eligible search campaigns. Put the “never, for any service” words there.

Sometimes you only want one form of a word. We block “jobs” but not “job,” because job seekers search “plumbing jobs” and homeowners search “small plumbing job.”

Add every multi-word entry in the table as a phrase negative, which means typing it with quotes around it. It matters most for how to. As a broad negative, it would block “how much to replace a roof,” which is a buyer.

ListStarter negatives
Every trade (account level)jobs, hiring, career, careers, salary, apprentice, apprenticeship, school, training course, license exam, DIY, how to, youtube, parts store, supply house, for sale
Plumbingplumbing code, pipe fittings, toilet parts, faucet parts
HVACfilter sizes, thermostat manual, window unit, portable AC, car AC, refrigerant chart
Roofingroof rack, roofing nails, shingles for sale, roofing calculator
Electricalelectrical symbols, wire gauge chart, wiring diagram, outlet types, extension cord
Remodelingpictures, Pinterest, design software, before and after

Check each word against your own services before you add it. A roofer who also sells materials shouldn’t block “shingles for sale.” A commercial shop that works for school districts should drop “school.”

We also leave off “reddit,” since people search things like “best roofer near me reddit” before they hire, and “ideas” or “cost calculator” for remodelers, since buyers pricing a job use them. And we don’t block “free,” because people asking for a free estimate are often ready to book. We also left out big-box store names. Watch your search terms first, because some of those searchers are shopping for an installer.

The starter list only gets you so far. The real list comes from your search terms report, Google’s list of what people typed before your ad showed. One catch: it only lists searches “a significant number of people” used, so some one-off searches won’t appear. Your call recordings fill that gap.

Go through the report every week. A search you’d never pay for goes on the negative list. A search that brought a real lead but isn’t a keyword yet gets added as one, so you bid on it on purpose.

More budget buys more leads, and it gets you enough data to judge a keyword in weeks instead of months. Here’s what each level looks like with LocaliQ’s typical plumbing numbers plugged in, $10.49 a click and 7.63% conversion. These are example calculations of ad spend only, not management fees, and your market will differ. A roofer at LocaliQ’s $10.70 and 3.70% would get about 17 leads from the same $5,000.

First, how Google spends it. You set an average daily budget, and Google says to divide a monthly budget by 30.4. On a busy day a campaign can spend up to twice the daily budget, but over a month it won’t charge more than 30.4 times it. So a $50 day can turn into a $100 day. That’s normal, so don’t cut the budget over one hot day.

Monthly budgetDaily budget (÷ 30.4)Clicks at $10.49Leads at 7.63%
$1,500About $49About 143About 11
$5,000About $164About 477About 36
$15,000About $493About 1,430About 109

If you divide $10.49 by 7.63%, you get about $137 a lead, a bit above the $129.02 in the table. That’s normal. Medians don’t divide into each other cleanly.

At $1,500 a month: one job, done well

Pick your one or two most profitable services and nothing else. Phrase and exact match only, Presence targeting around the towns you want, and ads only while someone answers.

We start new campaigns on Maximize clicks with a max cost per click near your trade’s typical click, or on manual bids. About 11 leads a month starts to show which keywords work, but give it two or three months. It isn’t enough to split across five services. If Local Services Ads cover your trade, we’d run those alongside.

At $5,000 a month: split by job type

Now the structure from earlier fits: emergency, two or three planned services and a small brand campaign, each with its own budget. At roughly 36 leads a month, patterns show up fast. This is about when we start testing automated bidding toward conversions, as long as tracking is clean.

At $15,000 a month: cover the calendar

Here we’d cover every service you want, move money with the seasons and run emergency ads around the clock if your phones are covered. A careful Performance Max test can make sense at this level. Keep exact match Search campaigns for your core jobs, though. Google says an exact match keyword that’s identical to the search gets priority over Performance Max.

Search ads, Local Services Ads or SEO first?

Where your next dollar goes comes down to your trade, your phones and your calendar. Here’s where we’d put it.

Your situationWhere we’d put the next dollarWhy
LSA covers your trade and you answer fastLocal Services AdsYou pay when a customer gets in touch, not per click
You need jobs next month for a service LSA doesn’t send youSearch ads, one tight campaignYou pick the job, the area and the hours
Big-ticket jobs with long decisions (remodels, additions)Search ads plus strong service pagesHigh break-even, but buyers read before they call
Busy now, thinking about next yearSEO and your Google Business ProfileRankings build up; ad leads stop when the budget does
Phones go to voicemail half the timeFix call handling firstEvery channel wastes money on missed calls

We’d rather see $1,500 on one service that books than $5,000 spread across everything you do.

Local Services Ads come with a catch. Google says that if you regularly fail to answer calls or respond to messages, your ad ranking may be affected. Search ads charge for the click whether or not anyone picks up. Our guide to how Google Verified works now covers the badge side of LSA.

Plenty of shops run both: LSA for the core service, search ads for the jobs and towns LSA doesn’t bring in. Roofers can compare every option in our roofing lead sources ranked by cost per signed roof. For the bigger picture, read about renting versus owning your leads, or map every channel in a one-page marketing plan.

The 20-minute weekly Google Ads routine

Most of the leaky accounts we audit have one thing in common. Nobody has opened the search terms report in months, so the same job seekers, DIY questions and out-of-area searches have been eating the budget week after week. A 20-minute check, same day every week, keeps it from piling up. Pick a day (Monday works for most shops) and put it on the calendar.

HVAC company owner at her kitchen table reviewing last week's Google Ads leads and service tickets
Checking last week’s leads takes a few minutes at the kitchen table.
  1. Search terms (8 minutes). Open the report for the last 7 days. Add junk as negatives. Add good searches you aren’t bidding on yet as phrase or exact keywords.
  2. Calls and forms (5 minutes). Count tracked calls and forms by campaign. If your call tool records, play three. Note any service you don’t offer, any town you don’t serve and any spam.
  3. Budget (2 minutes). Look for campaigns marked “Limited by budget.” If it’s your best one, move money to it from a weaker campaign before you add more.
  4. Settings drift (2 minutes). Skim the change history. Make sure nothing turned search partners, Display, broad match or AI Max back on.
  5. Recommendations (3 minutes). Read them. Apply useful ones by hand, like a missing call asset or sitelinks. Dismiss the ones that just spend more.

Once a month, add one bigger step. Match ad leads to your schedule or CRM and work out cost per booked job for each campaign. Then move money toward the campaign with the lowest cost per booked job, even if its clicks cost more. Owners skip this step, and it’s the only one that tells you whether the ads pay.

How to check an agency’s PPC work

If you pay someone to run your ads, you should still be able to check the basics. You don’t need to learn the platform. Put this list in front of them on a call.

  • The Google Ads account is in your business’s name and you’re an admin. If you switch agencies, you keep the account and all its history.
  • Conversions are real calls over a set length and real form fills. Not page views, not taps on a phone number.
  • Search partners and the Display Network are off, or they can show you partner results split out with the Network segment.
  • AI Max is off, or they can explain why it’s on and show you the search terms and landing pages it picked.
  • Location options are set to Presence, and the map matches the area you serve.
  • There’s an account-level negative keyword list, and it’s longer than it was at launch.
  • They can show you last week’s search terms and what they did about them.
  • Their report shows leads by campaign and, at least monthly, booked jobs or cost per booked job. Not just clicks.

Two or more missing? The account is probably leaking money. Ask them which ones they’ll fix in the next 30 days and how they’ll prove it.

We run Google Ads management for contractors at D&J, and we’re a Google Partner. We’d still rather you know what good looks like before you hire anyone, us included.

What to do this week

  1. Work out your break-even cost per lead for your two best services.
  2. If you already run ads, open campaign settings and check the seven settings in the table. Fix any that are still wide open.
  3. Make sure calls from ads and from your site are tracked, and test your form.
  4. Pull last month’s search terms and add your first round of negatives.
  5. Put the weekly routine on your calendar.

Not sure your site is ready for paid traffic? Start with our free local SEO audit. It checks the pages and the Google Business Profile your ads lean on. If you’d rather hand the ads off, talk to our team.

PPC for contractors FAQ

How much does PPC cost for contractors?

There’s no set price, because every click is an auction. In LocaliQ’s 2025 home services report (Google and Microsoft search campaigns, April 2024 to March 2025, medians), the typical click cost $7.85 and the typical lead cost $90.92. Among the trades in our table, clicks ran from $5.31 for general contractors to $12.18 for electricians. Painters paid the most per click in the full report, $13.74. Use the break-even math above to decide what you can afford.

Is $500 a month enough for Google Ads?

It’s thin. That’s about $16 a day. At a $10.49 plumbing click it buys around 48 clicks, which works out to 3 or 4 leads a month in our example math. That can work for one high-value service in a small area. For most contractors, we’d put that $500 into Local Services Ads if your trade and area are covered.

Should I run Local Services Ads or Google search ads?

Usually both, in that order. LSA is the simpler test when Google offers it for your trade and your phones are covered, since you pay per lead instead of per click. Search ads fill in the services, towns and big-ticket jobs LSA misses. The decision table above walks through each case.

Is PPC better than SEO for contractors?

They do different jobs. Ads can bring calls this week and stop the day you stop paying. SEO takes months, but it keeps bringing calls without a per-click bill. Many of the contractors we work with use ads to fill gaps while SEO builds, then lean on ads less as rankings come in.

How long before Google Ads work?

Calls can start the first week. Knowing whether it works takes longer. We like 60 to 90 days of clean tracking before making big changes, and longer on small budgets or slow-sale trades like remodeling. If you see zero leads after a month with tracking in place, something in the setup needs fixing.

Should I manage Google Ads myself or hire someone?

You can run a small account yourself if you’ll do the 20-minute routine every single week. Most owners skip weeks in busy season, and that’s when junk searches pile up. If you hire someone, keep the account in your name and use the checklist above to check their work each month.

Share this article

Written by Dory Aine, co-founder of D&J Contractor Marketing

Want it done for you?

Let's find the jobs you're missing.

Book a free 30-minute strategy call. We'll review your Google Business Profile, local rankings and ads, and show you what to fix first. No pitch, no pressure.

Call Book a strategy call